A machine for processing composite panels by allowing the side panels to be closed, to hide the interior of the infill. In addition to aluminum composite panels, the machine can process aluminum honeycomb panels as well as HPL panels.Plate height: min 3 - max 36 mm Plate height: min 1/8'' - max 1'' + 13/32 Plate height (Alu honeycomb): min 10 - max 15 mm Plate height (Alu honeycomb): min 13/32 "- max 19/32 Panel width: min. 110 mm - min. 4' + 5/16' Board length: min. 120 mm - min. 4' + 23/32' Variable speed of the panel device: from 2 mt / 1' to 8 mt / 1' Drive plate variable speed: from 6 ft / min to 26 ft / min Motor reducer STD: 200 Hz - 12.000 RPM - 0,50 KW Cutting motor OPT: 200 Hz - 12.000 rpm - 0,73 KW Toothed knives for carbide: Ø 80 mm Z10 - for Ø 16 mm Knife cutter screw: Ø 3'+ 1/8' Z10 hole Ø 5/8' Total power loads: min. 1,5 KW - 2,5 KW
Processing center for the processing of plate materials produced by "Promak" Italy.The machine was originally intended for processing aluminum composite "bond" panels, but it is also possible to process other materials such as aluminum sheet, various ALU and PVC panels, etc. The material that we process on the machine is held using a vacuum, which enables fast and high-quality processing.Complete processing is done on a computer in the "Alphacam" program.We provide the service of workshop processing of panel materials
Max width of panels: 2000 mmMilling speeds: y-axis: 20 m/minResolution of the x,y axis: 10 µ/mSuction pressure: 4 x 275 MbarMax number of revolutions: 40000 giri/1'
